Our instructions are designed to be used in a number of classrooms. Podium touchscreen panel models will differ slightly, but functionality remains similar.
If you have suggestions to make this help document better, please email them to usersupportservices@qukmj.com,或致电x2888. 我们希望得到您的反馈!
The podium’s touchscreen should come on automatically when it detects movement around it. If it does not, press any button to turn it on.
The screen may come up with a "开始" button if it had previously been turned off.
Once the "开始" button has been pressed, it will display "please wait while the system starts up". After the system starts, the screen will read “选择要开始的源”.
如果你想用电脑, you also must turn on the computer and the monitor: Select the device you wish to use through the Podium Control Panel buttons.
In the podium cabinet, find the computer. 按下 权力 按钮在前面. Wait for the computer to completely start up.
Locate the HDMI cord in the podium cable cubby.
将HDMI线连接到笔记本电脑上.
On the podium’s control panel, press the 来自Cable Cubby的HDMI button on the top right of the podium control panel.
Turn your laptop/tablet on, and set mirroring of the display as necessary. Please consult the manufacturer support pages for assistance.
Locate the VGI cord in the podium cable cubby.
This cord has an integrated audio cable. Connect the VGA cord to your laptop, and press 移动PC 控制面板上的按钮.
Turn your laptop on, and set mirroring of the display as necessary. Please consult the manufacturer support pages for assistance.
To add audio, connect the integrated audio cable to the headphone jack on your laptop.
Adjust the volume on the laptop and the podium by using the audio knob on the bottom middle of the podium control panel.
Retrieve the HDMI adapter cable from the podium cable cubby.
Plug the MDP connector into your laptop. Plug the other end of the cable into the HDMI plug in the cable cubby.
按下 来自Cable Cubby的HDMI 控制面板上的按钮.
Turn your laptop on, and set mirroring of the display as necessary. Please consult the manufacturer support pages for assistance.
按下iPhone, iPad, iPad迷你, Mac 移动PCs button under the Wireless Devices section of the podium control panel.
Follow the instructions on the control panel to connect to the projector via wireless.
按“Android”或“Windows 8”键.1 and later button under the Wireless Devices section of the podium control panel.
Follow the instructions on the control panel to connect to the projector via wireless.
Android Devices are not standardized, so please test functionality before using in class. 如果设备没有连接, you should consider updating to the latest operating system, 但这样做的风险由你自己承担.
Turn on the computer using the instructions on the first page.
按下 喷射 button on the DVD tray on the computer, insert your disc, and close the tray.
按下 戴尔电脑 button on the podium’s touchscreen control panel.
所有DVD控制(除了 喷射 button) are accessed through the podium’s touchscreen control panel.
If the computer is selected as the source to display through the projector, the screen can be muted and hidden by selecting the 沉默的 button at the bottom left of the touch screen and 然后选择 仅视频静音 在“静音选择”窗口中.
From any screen, you may adjust the speaker volume with the knob under the touchscreen on the podium. 见第3页的图表. 顺时针调高音量.
With many devices, you may mute the speakers by using the controls on the device you are using. 例如, on the computer click the speaker icon at the bottom right corner of the screen and then click on the blue speaker icon that appears. A red “cancel” symbol should appear, indicating the audio is muted.
You may adjust the volume of the microphone by pressing the Audio Control button at the bottom right of the touchscreen. 按下 up and down arrows to adjust the microphone's volume.
The audio can be muted by selecting the 沉默的 button at the bottom right of the touch screen and then choosing 沉默的 Audio Only from the 沉默的 Selection.
You may plug your USB memory sticks into the USB ports in the computer inside the podium or into the USB port cable found in the cable cubby of the podium.
The USB ports in the cubby next to the outlets are for charging only.
只用手柄抬起手臂. From the front of the device, pull it up and back. 见右图.
On the podium’s touchscreen control, press the “WolfVision文档摄像机”按钮. The document camera will automatically 权力 on.
按下 light button on the back of the viewing surface.
On the top of the camera, push the dial (shown on the right) up to zoom out, or down to zoom in.
按下 权力 button on the back of the viewing surface.
按下 冻结 button on the right side of the podium control panel. Press it again to unfreeze the screen.
按下 Display 沉默的 push button on the top right of the podium control panel. 屏幕将变为空白. 再次按此键可取消屏幕静音.
在电脑上,导航到 开始 -> 关闭.
On the podium’s touchscreen control, press the red 系统了 按钮在右下角. 确认您的选择.
There are buttons just under the bottom right side of the desk.